Single Satellite Search; Multi Satellite Search - NPG DHTS 4022A User Manual

DHTS 4022A
Transpondeur : suivez les étapes de la section précédente.
Position No., & Save: The range is from 0 to 63. "0" delegates the original position.
You can select the proper value when you has rotated the antenna.
Go to X: Press OK key to pop up the drop-down list, select the proper position (re-
ference or from 1to 63) to realize the selected position.
West <Save> East: Press
key to turn west, while press
Press OK key to pop up the dialogue "Are you sure to change this satellite's posi-
tion?". Press OK key at the Yes button to save the current position, or press OK
key at the No button to cancel the operation.
Recalculation: Press OK key to pop up the dialogue "Are you sure to change this
satellite's position?". Press OK key at the Yes button to recalculation.
5. Limit Setup: Press OK key to pop up the
Limit Setup window.
Limit Setup: Press
keys to switch
among Disable Limit, East Limit and West
Limit.
Limit Setup: Move cursor to the Limit Setup
button. You can press key to turn west ,
or press key to turn east.
Go to Reference: Press OK key to go to refe-
rence. If you select Disable Limit in the above
Limit Setup item, this button will turn grey.
6. If select USALS, Delete All item will turn grey.
Local Longitude, Local Latitude: Press
East, or press keys to switch between North and South. Press OK key to
enter into the editing mode. Use numeric keys (0-9) to input the longitude or lati-
tude, press MENU key or EXIT key to exit. The range of the longitude is from 0 to
180,while the range of the latitude is from 0 to 90. If the inputted value is not in
this range, system will pop up a dialogue "Out of Range" when you exit from this
window. You can press OK key to close this
7. Motor Setting: Press OK key to enter into the Motor setting window.
Satellite, Transponder: Press
press OK key to pop up the drop-down list and select in the list.
10 ENGLISH
key to turn east.
keys to switch between West and
keys to select satellite or transponder, or

2.4 Single Satellite Search

1. Satellite : Press keys to select the satellite in circle. Or press OK key to
pop up the drop-down list, then select the desired satellite in the list and press OK
key to confirm.
2. FTA Only: Press keys to select between Yes and No.
3. Scan Channel: Press keys to select among TV+Radio, TV Channel, Radio.
4. Network Search: Select between No and
Yes. This item turns grey when Auto Scan is
selected in the following Scan mode item.
5. Scan Mode: Press keys to select
between Auto Scan and Preset Scan. Auto
Scan is Blind scan, while Preset Scan is to se-
arch the preset frequencies.
6.Turner: LNB1
7. Search: Press OK key to start searching.

2.5 Multi Satellite Search

From the Multi Satellite Search window, you can search several satellites at the
one time.
1. Satellite: All selected satellites in the satellite
list window are displayed on the down part.
You can press keys to switch among
them.
2. FTA Only: Press
keys to select bet-
ween Yes and No.
3. Scan Channel: Press keys to select
among TV+Radio, TV Channel, Radio.
4. Network Search: Select between No and
Yes. This item turns grey when Auto Scan is
selected in the following Scan mode item.
5. Scan Mode: Press keys to select between Auto Scan and Preset Scan.
Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies.
6.Turner: LNB1
7. Search: Press OK key to start searching.