Section 1.0 - Installation; General Installation - Osburn 1800 Owner's Manual

Section 1.0 - Installation

When installed and operated as described in these instructions, the Osburn Model 1800 Bay Wood
Stove is suitable for use as a freestanding wood stove in either residential or mobile home installations.
The Model 1800 is not intended for installation in a bedroom.
In Canada the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment and the
CSA C22.1 Canadian National Electrical Code are to be followed in the absence of local code
requirements. In the USA the ANSI NFPA 70 National Electrical Code and NFPA 211 Standard for
Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances are to be followed in the absence of
local code requirements.
In addition to the national installation codes, local building and/or fire officials (or other authorities
having jurisdiction) should be contacted to determine what restrictions and installation requirements
might locally apply.

1.1 General Installation

1. Proper ventilation is required.
2. Do not connect this unit to any air distribution duct.
3. Connect the stove only to a lined masonry chimney conforming to national and local
building codes for use with solid fuel, or to a listed factory built chimney suitable for use
with solid fuel.
5