Building In The Appliance; Weight Of Furniture Doors; Building Into A Peninsular Run - Miele FN 9752 i Operating And Installation Instructions

Building in the appliance

All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
To install the appliance you will need
the following tools:
– a cross-slotted screwdriver,
– a selection of Torx screwdrivers,
– a hexagon spanner

Weight of furniture doors

Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted.
Appliance
FN 9752 i
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
40
max. weight of the
furniture door in kg
23

Building into a peninsular run

When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.