Switching On And Off; Safety Lock - Miele FN 9752 i Operating And Installation Instructions

Switching on and off

Before using for the first time
To ensure the correct functioning of
the appliance, let it stand for
between 30 minutes and 1 hour after
transporting it to its final location
before connecting it to the mains.
Cleaning
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Switching on
^ Press the On/Off button.
The temperature display lights up and
the appliance starts cooling.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^ Press the On/Off button until the
temperature display goes out.
12
The cooling system is switched off. (If
this does not happen, the safety lock is
still activated).

Safety lock

The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
Activating or de-activating the safety
lock
^ Press and hold the SuperFreeze
button for approx. 5 seconds.
The SuperFreeze indicator light flashes,
;
and flashes in the temperature
display.
^ Then press the SuperFreeze button
again.
;
will light up in the display.
^ You can now choose between
;
1 by pressing the temperature
and
selector buttons:
0: the safety lock is de-activated,
1: the safety lock is activated.
^ Press the SuperFreeze button to save
the setting.
The safety lock indicator light
light up when the safety lock has been
activated.
;
0
X
will