Table of Contents
Advertisement
Installation
Before installation
^ Before installation remove the cover
strip, sealing strip and other
accessories from inside the
appliance and from the external rear
wall of the appliance.
^ On no account should you remove
the spacers from the back of the
appliance. These ensure the gap
required between the back of the
appliance and the wall is maintained.
^ Remove any cable clips from the
back of the appliance.
^ Remove the red transit bars a and
seal the resulting holes with the caps
b supplied.
34
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Did your old appliance have a
different hinging mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door is now fitted to the appliance door.
All the necessary parts are supplied or
can be ordered from Miele.
Stainless steel front
(depending on model)
The old door can be replaced by a
stainless steel front if required.
Call Miele to order a stainless steel
front.
Hide quick links:
Advertisement
Table of Contents
