Miele FN 9752 i Operating And Installation Instructions page 46

Building in the appliance
Securing the appliance door to the
furniture door:
^ Screw the fixing bracket a with a
hexagonal headed screw b into the
pre-drilled holes in the appliance
door.
Make sure the two metal edges c
are aligned (symbol II).
^ Drill fixing holes d, and screw in the
4 x 14 mm screws e.
(On large or divided doors, attach a
second pair of fixing brackets a in the
handle region of the door. Use the
pre-drilled holes in the appliance door.)
– Align depth Z on the furniture door:
loosen screws f at the top of the
appliance door, and loosen the
screw g on the bottom of the fixing
bracket. By moving the furniture
doors, create a gap of 2 mm
between the furniture doors and the
front edge of the niche.
46
^ Close the door and align to match the
neighbouring furniture doors.
^ Whilst counterholding the adjusting
bolts i with a screwdriver, tighten
the nuts h on the appliance doors.
^ The cover strip j must not protrude,
and must be completely hidden in
the niche.
^ Tighten all screws again.