Line Keys and Softkeys
Configuring an Automatic Call Distribution (ACD) Key
Aastra Web UI
Use the following procedure to configure ACD on the 6737i IP Phone. The procedure shows the softkey screens as an
example.
1.
Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2.
Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3.
In the "Type" field, select "Auto call distribution".
4.
In the "Label" field, enter a label to apply to this ACD key.
5.
In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1 through 9.
6.
(Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the "idle" state for this softkey.
Expansion Module Keys
7.
Select from "Key 1" through "Key 36" (M670i)
or
Select from "Key 1" through "Key 60" (M675i)
8.
(M675i) In the "Label" field, enter a label to apply to this ACD key.
9.
In the "Line" field, select a line to apply Automatic call distribution. Valid values are 1 through 9.
10.
Click Save Settings.
66
41-001452-05 REV02 – 07.2014