Rediscover Network - Go!Control 2GIG-CNTRL2 Operation & User’s Manual
Wireless z-wave services
Hide thumbs
Also See for 2GIG-CNTRL2:
- User manual (52 pages) ,
- Operation & user’s manual (24 pages) ,
- Installation & programming instructions (52 pages)
Table of Contents
Advertisement
Advanced Setup
Advanced Toolbox (cont.)
Rediscover Network
During normal operation the network decides
the best path to route signals from one device
to another. If devices are moved to different
positions in the installation, it is recommended
to rediscover the network so the routing path
will be re-confi gured.
Use the following steps to rediscover the
network:
1. From the Advanced Toolbox Screen, press the
REDISCOVER NETWORK button. The Control
Panel will display "Rediscovering Z-Wave
devices".
2. The system will pause, then return to the
Advanced Toolbox.
22
Rediscovering Network Screen
Advertisement
Table of Contents
Need help?
Do you have a question about the 2GIG-CNTRL2 and is the answer not in the manual?
Questions and answers