Editing Scenes; Changing A Device's Action; Removing A Device's Action; Renaming A Scene - Go!Control 2GIG-CNTRL2 Operation & User’s Manual

Scenes & Rules

Editing Scenes

Scenes can be edited to change a device's
action, remove a device's action, or rename the
Scene.
To edit a Scene, use the following steps.

Changing a Device's Action

1. From the Home Screen press the SERVICES
button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. A list of programmed Scenes will be displayed.
Press the name of the Scene to edit.
4. Press the desired device's button to select it.
5. Change the confi guration for the device and
press OK, then press BACK.
6. Test the Scene by pressing the RUN button. A
Scene execution confi rmation screen will be
displayed, press OK.

Removing a Device's Action

1. From the Home Screen press the SERVICES
button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. A list of programmed Scenes will be displayed.
Press the name of the Scene to edit.
4. Press the desired device's button to select it.
5. Press the delete
icon. A confi rmation screen
will be displayed, press DELETE ACTION to
confi rm, or CANCEL to quit without deleting.

Renaming a Scene

1. From the Home Screen press the SERVICES
button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. A list of programmed Scenes will be displayed.
Press the name of the Scene to rename.
4. Press the name icon. Use the alphanumeric
keypad displayed to rename the Scene.
5. Press OK to confi rm the name change or
CANCEL to quit.
14
Press SCENES
button
Manage Z-Wave Devices Screen
Press to select
a scene
Selecting a Scene
Press action to edit
Selecting an Device Action to Edit
Press to delete
an action
Deleting an Action
Press to change
a scene's name
Renaming a Scene