Running Scenes; Deleting Scenes - Go!Control 2GIG-CNTRL2 Operation & User’s Manual

Running Scenes

Scenes can be run by hand manually, or be
automatically run when triggered by a Rule.
To run a Scene manually, use the following
steps:
1. From the Home Screen press the SERVICES
button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. A list of programmed Scenes will be displayed.
4. Press the RUN button next to the desired Scene.
5. A Scene execution confi rmation screen will be
displayed, press OK.

Deleting Scenes

Scenes can be deleted individually.
✓ NOTE: Deleting a Scene will also delete any
Rule associated with the Scene.
To delete a Scene, use the following steps.
1. From the Home Screen press the SERVICES
button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. A list of programmed Scenes will be displayed.
Press the name of the Scene to delete.
4. Press the delete icon. A confi rmation screen
will be displayed, press DELETE SCENE to
confi rm, or CANCEL to quit without deleting.
5. A Scene Deleted confi rmation screen will be
displayed, press OK.
Scenes & Rules
Press SCENES
button
Manage Z-Wave Devices Screen
Press to run a
scene
Running a Scene
Scene Executed Screen
Press to delete
a scene
Deleting a Scene
Press to confi rm
Scene Delete Confi rmation Screen
Scene Deleted Screen
15