Scenes & Rules; Controlling Multiple Devices; Creating Scenes - Go!Control 2GIG-CNTRL2 Operation & User’s Manual

Scenes & Rules

Controlling Multiple Devices

Beyond simple controlling of a single device,
multiple device control commands can be
assigned using a " Scene". A Scene can be
run on its own, or " Rules" can be assigned to
trigger a Scene after a Control Panel "event"
such as arming your system or when an alarm
occurs.

Creating Scenes

Scenes are created by assigning one or more
device actions to the Scene. The multi-function
Scene can then be easily executed by pressing
the Scene's RUN button.
To create a Scene, use the following steps:
1. From the Home Screen press the SERVICES
button.
2. From the Manage Z-Wave Devices Screen, press
the SCENES button.
3. From the Z-Wave Scenes Screen press the ADD
SCENE button.
4. Use the alphanumeric keypad displayed to enter
a name for the new Scene. Press OK when
fi nished.
5. To select actions for the scene, press the ADD
button.
6. Press Z-WAVE SWITCH, Z-WAVE THERMOSTAT,
or Z-WAVE DOOR LOCK to add one of these
device types as an action to the Scene.
12
Press SCENES
button
Manage Z-Wave Devices Screen
Press to add a
scene
Z-Wave Scenes Screen
Naming a Scene
Press to add an
action to the scene
Select Action for the Scene
Press a device type
for the action
Adding an Action to a Scene