Download Print this page
Xpelair SLDC100 Installation And Maintenance Instructions

Xpelair SLDC100 Installation And Maintenance Instructions

Advertisement

Quick Links

Do's and Don'ts
Do read the entire instruction leaflet before commencing installation.
Do install each fan with a means for disconnection in all poles in the fixed wiring.
Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any
maintenance or cleaning.
Guarantee
UK only:
We, Applied Energy Products Ltd., provide a guarantee against faulty parts and manufacture for a period of 3 years
from the date of purchase. In the unlikely event of a product breakdown during the guarantee period the product
should be returned to the place of purchase or to Applied Energy Products Ltd.
Exclusions:
This guarantee does not cover compensation for the loss of the product or consequential loss of any kind.
Damage or defects to the product arising from incorrect installation or lack of maintenance.
Transportation costs.
This guarantee does not affect your statutory rights
Technical advice and service
Customers outside UK - see international below.
UK: Xpelair have a comprehensive range of services including:
Free technical advice help-desk from Engineers on all aspects of ventilation.
Free design service, quotations and site surveys.
Service and maintenance contracts to suit all requirements.
Please ask for details:
By telephone on Techline: +44 (0) 844 372 7766
By fax on Techfax: +44 (0) 844 372 7767
At the address below
Head Office, UK Sales Office and Spares
Applied Energy Products Ltd, Morley Way, Peterborough, PE2 9JJ England
Telephone: +44 (0) 844 372 7761
Fax: +44 (0) 844 372 7762
Sales/Spares Hotline: +44 (0) 844 372 7750
Sales/Spares Faxline: +44 (0) 844 372 7760
http:\\www.xpelair.co.uk
International
Guarantee: Contact your local distributor or Xpelair direct for details.
Technical Advice and Service: Contact your local Xpelair distributor.
Installation and Maintenance Instructions
Xpelair SLDC100
Xpelair SLDC100P
Xpelair SLDC100T
Xpelair SLDC100HT
Xpelair SLDC100PIR
Toilet / Bathroom 100mm Ultra DC Slimline Fan Range
Part No: 24118AA
(Revision A)
Standard
Pull Cord
Timer
Humidistat, Timer and Pull Cord
Integral Body Movement Sensor

Advertisement

loading
Need help?

Need help?

Do you have a question about the SLDC100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Xpelair SLDC100

  • Page 1 Sales/Spares Hotline: +44 (0) 844 372 7750 Sales/Spares Faxline: +44 (0) 844 372 7760 http:\\www.xpelair.co.uk International  Guarantee: Contact your local distributor or Xpelair direct for details.  Technical Advice and Service: Contact your local Xpelair distributor. Part No: 24118AA (Revision A)
  • Page 2 Operate the fan using an on/off switch (not supplied). When the switch is turned off, the fan continues to operate for  SLDC100 Overall Dimensions the set time delay. To adjust the over-run period, turn the control “T” clockwise to increase and anti-clockwise to decrease –...
  • Page 3 The switch marked 2 above it is a factory set position and should not be changed. For the SLDC100 range this switch should be in the UP position (away from the side of the switch marked ‘150mm size’). If this switch is NOT in the correct position the fan will NOT achieve the required speeds.
  • Page 4  If metal switch boxes are used, earthing regulations must be followed. 2. Mark on the wall the centre of the duct hole. For SLDC100 range the centre of the hole should be at least 110mm  Suitably rated 2-core cable – SLDC100 / SLDC100P / SLDC100PIR away from the edge of the mounting surface.

This manual is also suitable for:

Sldc100tSldc100pSldc100htSldc100pir