Intended use 3. Personal safety Your Black & Decker drill/screwdriver has been designed for a. Stay alert, watch what you are doing and use screwdriving applications and for drilling in wood, metal and common sense when operating a power tool. Do not plastics.
e. Maintain power tools. Check for misalignment or Additional safety instructions for batteries and chargers binding of moving parts, breakage of parts and any other condition that may affect the power tools Batteries operation. If damaged, have the power tool repaired Never attempt to open for any reason.
If the supply cord is damaged, it must be replaced by the Before using the tool, unplug the charger and disconnect manufacturer or an authorised Black & Decker Service the tool from the charger. Centre in order to avoid a hazard. Warning! Do not use the tool while it is connected to the Features charger.
Maintenance If the clutch ratchets before the desired result is achieved, increase the collar setting and continue Your Black & Decker tool has been designed to operate over a tightening the screw. Repeat until you reach the correct long period of time with a minimum of maintenance. setting.
If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 Technical data months from the date of purchase, Black & Decker guarantees CP14LN to replace defective parts, repair products subjected to fair Voltage 14.4...
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...