(Original instructions) ENGLISH Intended use d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Your BLACK+DECKER screwdriver has been designed Keep cord away from heat, oil, sharp edges or for screwdriving applications. This tool is intended for moving parts.
Page 4
ENGLISH (Original instructions) g. If devices are provided for the connection of dust 5. Battery tool use and care extraction and collection facilities, ensure these are connected and properly used. Use of dust manufacturer. A charger that is suitable for one type collection can reduce dust-related hazards.
(Original instructions) ENGLISH Use clamps or another practical way to secure Even with the application of the relevant safety regulations and support the workpiece to a stable platform. and the implementation of safety devices, certain residual Holding the work by hand or against your body leaves risks can not be avoided.
Your charger is double insulated; therefore no Warning! Only use the charger provided to charge the earth wire is required. Always check that the tool - CS3653LC. mains voltage corresponds to the voltage on To charge the battery, insert the charger plug (10) into the rating plate.
(Original instructions) ENGLISH current level of charge in the tool. For optimum versatility, the handle can be set to two Leave the tool connected to the charger for 3 hours. different positions. The charger may hum and become warm while charging; Press the handle adjustment button (4).
Separate collection. This product must not be disposed of with normal household waste. Technical data CS3653LC (H1) product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this Voltage product available for separate collection.
(Original instructions) ENGLISH How to make a warranty claim Australia & New Zealand Stanley Black & Decker u Any product subject to a warranty claim should be returned to the place of purchase for assessment www.blackanddecker.au by a Stanley Black & Decker Australia distributor Tel.1800 338 002 (Aust) or Tel.