ENGLISH –––––––––––––––––––––––––––––––––––––––––––––––––––––– c. Do not expose power tools to rain or wet PLR36NC conditions. Water entering a power tool will SCREWDRIVER increase the risk of electric shock. –––––––––––––––––––––––––––––––––––––––––––––––––––––– d. Do not abuse the cord. Never use the cord for TECHNICAL DATA carrying, pulling or unplugging the power tool.
Page 4
ENGLISH b. Do not use the power tool if the switch does not ADDITIONAL POWER TOOL SAFETY WARNINGS turn it on and off. Any power tool that cannot be Warning! Additional safety warnings for controlled with the switch is dangerous and must be screwdrivers and impact wrenches repaired.
Page 5
ENGLISH CHARGERS To fit a bit, insert the bit shaft into the bit holder (5) until it locks into place. Use your Black & Decker charger only to charge the To remove a bit, pull the bit shaft out of the bit holder battery in the tool with which it was supplied.
ENGLISH To switch the tool on, press the on/off switch (1). IMPORTANT To switch the tool off, release the on/off switch (1). To ensure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in LED LIGHT this manual) should be performed by authorized service The LED light (6) is activated automatically when the centers or other qualified organizations, always-using on/off switch (1) is depressed.
ENGLISH If necessary, contact your local municipality for proper disposal instructions in your city/town. BATTERIES Black & Decker batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment: Run the battery down completely, and then remove it from the tool.