Hide thumbs Also See for KC9072:




Table of Contents

Summary of Contents for Black & Decker KC9072

  • Page 1 ® KC9072 KC9038 KC9019...
  • Page 2 Congratulations! On the purchase of your Black & Decker cordless screwdriver. To ensure the best results from your cordless screwdriver please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
  • Page 3: Table Of Contents

    Contents Page 4 Safety instructions Additional screwdriver and charger safety instructions Page 5 Double insulation Electrical safety Mains plug replacement Extension Cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product Page 6 The after sales service policy Accessories...
  • Page 4: Safety Instructions

    Cordless screwdriver user manual • Remove adjusting keys and wrenches. Form the habit SAFETY INSTRUCTIONS of checking to see that keys and adjusting wrenches Warning! When using electric tools, the following are removed from tool before switching it on. basic safety precautions should always be taken to •...
  • Page 5: Double Insulation

    ENGLISH when changing accessories, ensure that the MAINS PLUG REPLACEMENT selector is in the central position. Should the mains plug or cordset of your charger be • When driving screws into walls, floors etc., check damaged, it must only be replaced by an authorised where “live”electrical wires may be encountered.
  • Page 6: The After Sales Service Policy

    ENGLISH THE AFTER SALES SERVICE POLICY time, charge it for at least 12 hours. (UK, AUSTRALIA AND NEW ZEALAND ONLY) After use place your screwdriver in its base and it will It is our aim that all Black & Decker customers should charge automatically.
  • Page 7: Operating Your Screwdriver

    ENGLISH The charger base is symmetrical and you can mount it AUTOMATIC SPINDLE LOCK either way up. With the switch set to any Insert a pencil through one of its 3 positions, and not of the two mounting holes depressed, you can use to mark its position.
  • Page 8: Handy Hints

    The usual EC DECLARATION OF CONFORMITY lubricants are soap or washing up liquid smeared on We declare that units: KC9019, KC9038, KC9072 the thread of the screw. conform to 89/392/EEC, 89/336/EEC, • When drilling in wood using a twist bit, pull the twist...
  • Page 10 Australia Black & Decker (A’asia) Pty Ltd Tel: 03 9213 8200 286-288 Maroondah Highway Fax: 03 9726 7150 North Croydon, Victoria 3136 New Zealand Black & Decker Tel: 09 579 7600 483 Great South Road, Penrose, Auckland Fax: 09 579 8200 South Africa Powerdek Tool Distributors Tel: 011 493 4000...
  • Page 12 12 Part no: ??????-?? 9/96.1...

This manual is also suitable for:


Table of Contents