Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker screwdriver has been designed for sense when operating a power tool. Do not use a power screwdriving applications. This tool is intended for consumer tool while you are tired or under the influence of drugs, use only.
Page 4
Before driving fasteners into walls, floors or ceilings, check f. Keep cutting tools sharp and clean. Properly for the location of wiring and pipes. maintained cutting tools with sharp cutting edges are less The intended use is described in this instruction manual. likely to bind and are easier to control.
Under abusive conditions, liquid may be ejected from Insert the battery holder into the tool and push until it the battery; avoid contact. If contact accidentally clicks into place. occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the Removing battery may cause irritation or burns.
Always hold the tool and screwdriver bit in a straight line Separate collection of used products and packaging with the screw. allows materials to be recycled and used again. When screwing in wood, it is recommended to drill a pilot Re-use of recycled materials helps prevent hole with a depth equal to the length of the screw.
Guarantee Vibration total values (triax vector sum) according to EN 60745: Black & Decker is confident of the quality of its products and Screwdriving without impact (a ) 0.33 m/s , uncertainty (K) 1.5 m/s h, S offers an outstanding guarantee. This guarantee statement is EC declaration of conformity in addition to and in no way prejudices your statutory rights.
Page 8
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...
Need help?
Do you have a question about the Powerful Solutions KC9006 and is the answer not in the manual?
Questions and answers