Changing The Batteries; Technical Data - Seca 767 Instruction Manual

7. Servicing
Your seca scale leaves the factory with an accuracy greater than ± 0.25 %. To ensure that
this accuracy is maintained, the product must be carefully set up and regularly maintained.
Depending on the frequency of use, we recommend servicing every 3 to 5 years. Please
ensure that a qualified service agent is used. If in doubt, contact seca Customer Service for
further information.

Changing the batteries

bAtt
When or
4 type AA 1.5 V batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Push the battery compartment closure
towards "Battery" and open the cover.
– Take out the holder and batteries.
– Remove the used batteries and insert
new batteries in the holder.
Check that the polarity is correct.
– Place the holder and batteries in the
battery compartment.
– Close the cover.
– Then turn the scale back up the right
way.

8. Technical data

Maximum load
Graduations
0 up to 200 kg
up to 450 lbs:
Dimensions scale
width:
height:
depth:
Dimensions weighing platform
width:
height:
depth:
Height of figures
Weight
Temperature range
Batteries
22
appear in the display, you should change the batteries. You need
200 kg / 450 lbs / 32 sts
0.1 kg
0.2 lbs
292 mm / 11.5 ins
850 mm / 33.5 ins
409 mm / 16.1 ins
292 mm / 11.5 ins
77 mm / 3.0 ins
300 mm / 11.8 ins
20 mm
approx. 6,8 kg
+10 °C to +40 °C
4 type AA 1.5 V batteries