Changing The Batteries; Technical Data - Seca 606 Manual

Visit www.Balances.com Your Authorized Seca Dealer

Changing the batteries

bAtt
When or
6 type AA 1.5 V batteries.
– Turn the display unit round carefully so
that the battery compartment is acces-
sible.
– Push the battery compartment closure
towards "Battery" and open the cover.
– Take out the holder and batteries.
– Remove the used batteries and insert
new batteries in the holder.
Check that the polarity is correct.
– Place the holder and batteries in the
battery compartment.
– Close the cover.
– Then turn the display unit back again.

8. Technical data

Dimensions
width:
height:
depth:
Height of figures
Weight
Temperature range
Power supply
Power consumption
Batteries
Accuracy
Maximum load
Tare range
Graduations
0 up to 20 kg / 44 lbs
20 kg up to 50 kg / 110 lbs
50 kg up to 100 kg / 220 lbs
Colour
Functions
20
appear in the display, you should change the batteries. You need
900 mm
75 mm
600 mm
20 mm
approx. 14 kg
+10 °C to +40 °C
Battery/mains unit (option)
approx. 30 mA
6 type AA 1.5 V batteries
± 50 g < 25 kg > ± 0.2 %
100 kg / 220 lbs
up to 100 kg / 220 lbs
20g / 1 oz
50g / 2 oz
100g / 4 oz
white
Switch between units, Tare,
Auto-Hold (from 500 g), damping
Battery
compartment