PACOM PDRH-440 User Manual page 55

Highlight the box beside Check Time Overlap and press the
be able to turn the Check Time Overlap on or off if a user-defined date and time is set to From and To. If the DVR's
date and time have been reset, it is possible for the DVR to have more than one overlapping start and stop time. When
set to On, you will be asked to select one of the overlapping start and stop time. When set to Off, the DVR will display
search results from all start times to all stop times.
Highlight the box beside Alarm-In and press the
in your search.
Highlight the box beside Motion and press the
of motion detection.
Highlight the box beside Video Loss and press the
of lost video.
Highlight the box beside Video Blind and press the
reports of blind video.
Highlight the box beside Text-In and press the
of text input.
Highlight the box beside Record Channels and press the
for any reports of event recorded data. The DVR will display the events (not the camera channels) that occurred and
that also are recorded on the camera channel that you selected. If you do not select a camera channel in this field, the
DVR will search events that are not associated with cameras.
You can also toggle On and Off self-diagnostic events as part of your search. The choices are:
 Panic Record
 Check Recording
 Check Alarm-In
 Disk Almost Full
 Disk Bad
 Disk Temperature
 Disk S.M.A.R.T.
 Fan Error
Once you set your desired search conditions, highlight Search and press the
the Event Log Search screen. Selecting Cancel exits the screen without saving the changes.
You can search video from the first to last recorded images, or
you can set the start and stop times and dates.
Highlight the box beside From and press the
between On and Off. When set to Off, you can enter a specific
Date and Time. When set to On, the search will be from the
first recorded image.
Highlight the box beside To and press the
between On and Off. When set to Off, you can enter a specific
Date and Time. When set to On, the search will be from the
last recorded image.
button. It toggles between On and Off. You will only
button. You can select the alarm inputs that you want to include
button. You can select the cameras for which you want any reports
button. You can select the cameras for which you want any reports
button. You can select the cameras for which you want any
button. You can select the text-in devices which you want any report
button. You can select the cameras that you want to search
4-Channel Digital Video Recorder
button to toggle
button to toggle
button to display the search results in
47