Table of Contents
Advertisement
12.3
Answer delay
Answer delay sets the number of times the C5010A will ring before the
answering machine picks up your call and starts playing the outgoing
message.
You can change this setting to between 2 - 9 rings or Time
setting is 5 rings.
1. Press Menu, scroll
2. Scroll
to Answer
3. Scroll or
4. Scroll or to the setting you want and press Select.
5. Press
to return to standby.
NOTE
If Time Saver is set, the answering machine will answer after 2 rings during
remote access if you have new messages. If you do not have any new
messages, it will answer after 6 rings. This means you can hang up after 3
rings knowing you have no new messages, saving you time and the cost of
the call.
12.4
Message alert
When you have new messages, with the audible message alert switched
on, you will hear an audible alert once at the handset and the answering
machine base will beep every 10 seconds. T he default setting is Off.
1. Press Menu, scroll
2. Scroll
to Answer
3. Scroll or
4. Scroll or to Off or On then press Select.
5. Press
to return to standby.
12.5
New messages alert
When you have new messages, the display shows You have X new
If you press Back, the screen returns to standby and the
1. Press Play and scroll or to the message you want to play. Press Play to
hear the highlighted message.
12.6
Outgoing messages
The outgoing message is the message a caller first hears when the
answering machine picks up their call. T he C5010A comes with 2 pre-
recorded outgoing messages, or you can record your own.
to Answer
Machine and press Select.
Settings and press Select.
Delay and press Select.
to Answer
to Answer
Machine and press Select.
Settings and press Select.
Alert and press Select.
to Message
Saver. T he default
messages.
icon is displayed.
Using the answer machine
49
Hide quick links:
Advertisement
Table of Contents
