Cleaning The Cover - Britax Chaperone User Manual

66 Care and Maintenance
9 Fit the plastic flaps under the
edge of the child seat shell.
Replace the head restraint
11
cover.
* Be careful not to damage the
energy absorbing foam.
* Ensure the slots are aligned in
the head restraint cover, comfort
foam, and infant carrier shell.
13 Re-attach the harness straps
to the harness yoke.
* Ensure the harness straps are
not twisted.
* See pages 47-50 for information
on which harness strap loops
to use.
10 Replace the comfort pads on
the harness straps.
Route the harness straps
12
though the head restraint
cover, comfort foam, and
infant carrier shell.
14 Before using the infant carrier,
double check that the harness
straps are not twisted, and
that the comfort pads, chest
clip, and buckle tongues
appear as shown.

Cleaning the Cover

• HAND WASH, using cold water and mild soap.
• LINE DRY, to prevent cover from shrinking.
• DO NOT:
* Bleach
* Machine Wash
* Machine Dry
* Iron
Cleaning the Shell & Harness
• BRUSH AWAY LOOSE DEBRIS, using a soft bristled brush.
• SPONGE CLEAN, using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Use solvents,
* Use abrasive cleaners
* Bleach
* Machine wash
* Machine dry
* Disassemble the harness
* Iron the harness
Care and Maintenance 67