Cleaning The Cover; Cleaning The Harness; Replacing The Cover - Britax FRONTIER CT User Manual

Care and Maintenance

Cleaning the Cover

• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.
• DO NOT:
* Bleach
* Machine wash
* Machine dry
* Iron

Cleaning the Harness

• SPONGE CLEAN the harness using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Disassemble the harness
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Shell
• SPONGE CLEAN the shell using warm water and mild soap.
• TOWEL DRY
• DO NOT use abrasive cleaners.

Replacing the Cover

Pull the elastic bands over the
1
hooks on the bottom of the
child seat shell.
Hook the clips at the front of
2
the seat cover to the bottom of
the child seat shell.
Pull the EZ-Buckle belly pad
3
through the appropriate slot in
the seat cover. Hook the clips
at the back of the seat cover to
the child seat shell.
42
Fit the cover over the
4
CLICKTIGHT and pull the
elastic band over the hook on
the bottom of the CLICKTIGHT.
Close the CLICKTIGHT.
5
* A click confirms the
CLICKTIGHT is secure.
Fit the side wing cover to the
6
child seat shell and pull the
elastic band over the hook at
the top of the child seat shell.
Repeat for the other side.
Pull the bottom elastic bands
7
over the hooks at the bottom
of each side of the head
restraint.
Fit the head restraint cover
8
over the head restraint and
pull the top elastic bands
over the hooks at the top
of each side of the head
restraint.
Attach the hook and loop
9
fasteners on the head restraint
cover around the harness.
Care and Maintenance
43