Operation Instructions - PROEL PLAB4ML User Manual

OPERATION INSTRUCTIONS

The PLAB4ML Blinder moving head uses LED digital display
•
method to control the channel setting.
The PLAB4ML Blinder moving head adopts international standard
•
DMX-512 signal, multiple lights can be controlled by the controller
due to use the channel setting (the details are listed in Appendix 2).
Use the XLR-XLR cable from the signal output port of the consol to
•
connect the signal input port of the first light, connect the signal
output port of the first light with the signal input port of the second
light, and so on, until all lights are connected.
For all installation, having long signal cables or in the presence of
•
electrical noise, for example a discotheque, it is recommended
practice to use a DMX terminator: this assist in preventing
corruption of the digital control signal by external noise. The DMX
terminator is simply an XLR connector with a 120Ω (Ohm) resistor
connected across pins 2 and 3, which is then plugged into the
DIGITAL THRU socket on the last projector in the chain.
18