Control Channels; Appendix 1: The Transformation Between 3 Core And 5 Core Xlr Plug - PROEL PLAB4ML User Manual

The PLAB4ML Blinder moving head uses core XLR outlet
•
(plug). A transfer line from 5 core to 3 core will be needed if the
controller you use is 5 core outlet (plug). (Please refer to
Appendix 1).
When power is on, the equipment will undertake self-
•
examination, and can undertake operation after the self-
examination is finished.
Please don't shake the equipment when it is in operation.
•

CONTROL CHANNELS

The PLAB4ML Blinder moving head uses international standard
DMX512 signal. There are 6 control channels and the detailed
information of control is as follow:
Channel
1
2
3
4
5
6
APPENDIX 1: The transformation between 3 core and 5
core XLR plug
3 pin (male)
PIN1: GND
PIN2: Signal +
PIN3: Signal -
DMX value
DIMMER 0 - 255
STROBE 0 - 255
PAN 0 - 255
TILT 0 - 255
PAN fine 0 - 255
TILT fine 0 - 255
19
Control
0 – 100%
slow - fast
0 – 540°
0 – 180°
16 Bit
16 Bit
3 pin (female)
PIN1: GND
PIN2: Signal +
PIN3: Signal -