Ipv6 Firewall - D-Link DIR-640L User Manual

Section 4 - Advanced
The IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The IPv6
Firewall functions in a similar way to the IP Filters feature.
Enable IPv6 Simple
Security:
Check the box to enable the IPv6 firewall simple security.
Configure IPv6
Firewall:
Select an action from the drop-down menu.
Name:
Enter a name to identify the IPv6 firewall rule.
Schedule:
Use the drop-down menu to select the time schedule that
the IPv6 Firewall Rule will be enabled on. The schedule may
be set to Always, which will allow the particular service to
always be enabled. You can create your own times in the
Maintenance > Schedules section.
Source: Use the Source drop-down menu to specify the interface
that connects to the source IPv6 addresses of the firewall
rule.
IP Address Range:
Enter the source IPv6 address range in the adjacent IP
Address Range field.
Destination: Use the Destination drop-down menu to specify the
interface that connects to the destination IP addresses of
the firewall rule.
Protocol: Select the protocol of the firewall port (All, TCP, UDP, or ICMP). Enter the first port of the range that will be used for the firewall
rule in the first box and enter the last port in the field in the second box.
D-Link DIR-640L User Manual

IPv6 Firewall

74