Wall-Mount Kit Installation - D-Link DIR-640L User Manual

Section 2 - Installation
The wall-mount kit includes the following items:
- Two 2 cm screws
- Two screw anchors
- One attachment plate
Step 1. Align the attachment plate to your preferred position, and mark the hole positions on the wall, preferably
after you locate one of the studs in the wall.
Step 2. Poke holes into the wall and insert the screw anchors where there is no stud. Check the screw anchors are
securely in place.
Step 3. Securely screw down the attachment plate on the wall.
Wall mount hole
Step 4. Hang the router on the wall by sliding the tops of the screws through the holes on the bottom of the router
and then slide to lock into position. Confirm the the router is firmly in place.
D-Link DIR-640L User Manual

Wall-Mount Kit Installation

DIR-640L
Wall mount hole
9