Russian L2Tp - D-Link DIR-640L User Manual

Section 3 - Configuration
Choose Russian L2TP (Dual Access) if your ISP uses an L2TP connection in Russia with WAN physical access.
My Internet
Connection: Select Russian L2TP (Dual Access) from the drop-down menu.
LT2P Server IP
Address: Enter the IP address provided by your ISP.
User Name:
Enter your L2TP user name.
Password: Enter your L2TP password and then retype the password in the next box.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Time: Enter a maximum idle time during which the Internet connection is
maintained during inactivity. To disable this feature, enable auto-reconnect.
MTU:
Enter the desired Maximum Transmission Unit.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses. In most cases, select Dynamic.
L2TP IP Address:
Enter the L2TP IP address.
L2TP Subnet Mask: Enter your L2TP subnet mask.
L2TP Gateway IP
Address:
Enter the L2TP gateway IP address.
MAC Address: The default MAC address is set to the Internet port's physical interface MAC address on the broadband router. It is not recommended
that you change the default MAC address unless required by your ISP.
DNS Addresses:
Enter the primary and secondary DNS server addresses.
D-Link DIR-640L User Manual

Russian L2TP

29