Manual Wireless Settings - D-Link DIR-640L User Manual

Section 3 - Configuration
The Wireless Settings feature will allow you to create temporary zones that can be used by guests to access the Internet.
Enable Wireless:
Check to enable the wireless function. If you do not want
to use wireless, uncheck the box to disable all the wireless
functions.
IP Address:
Input the IP address of the router. (The default is 192.169.0.1)
802.11 Mode:
Select the wireless mode from the drop-down menu.
Enable Auto
This setting can be selected to allow the DIR-640L to choose
Channel Scan: the channel with the least amount of interference.
Wireless Indicates the channel setting for the DIR-640L. If you enable
Channel: Auto Channel Scan, this option will be greyed out.
Transmission
Select the transmission rate or let the router automatically
Rate: choose for you.
Channel Width: Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using
both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless
clients.
40MHz - Select if using only 802.11n wireless clients.
Visibility Status: Select Invisible if you do not want the SSID of your wireless
network to be broadcasted by the DIR-640L. If Invisible is
selected, the SSID will not be seen by Site Survey utilities
so your wireless clients will have to know the SSID of the
DIR-640L.
D-Link DIR-640L User Manual

Manual Wireless Settings

36