Pptp - D-Link DIR-640L User Manual

Section 3 - Configuration
Choose PPTP if your ISP uses a PPTP connection. Your ISP will provide you with a username and password.
My Internet
Select PPTP from the drop-down menu.
Connection Is:
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
PPTP IP Address:
Enter the IP address for your PPTP connection.
PPTP Subnet Mask:
Enter your PPTP subnet mask.
PPTP Gateway IP
Address: Enter the gateway IP address for your PPTP connection.
PPTP Server IP
Address:
Enter the server IP address for your PPTP connection.
User Name: Enter your PPTP user name.
Password: Enter your PPTP password and then retype the password in the next box.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time:
auto-reconnect.
DNS Addresses: Enter the primary and secondary DNS server addresses (Static PPTP only).
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default
MTU.
MAC Address:
The default MAC address is set to the Internet port's physical interface MAC address on the broadband router. It is not recommended
that you change the default MAC address unless required by your ISP.
D-Link DIR-640L User Manual

PPTP

24