Pppoe - D-Link DIR-640L User Manual

Section 3 - Configuration
My IPv6 Connection: Select PPPoE from the drop-down menu.

PPPoE:

Enter the PPPoE account settings supplied by your
Internet provider (ISP).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the
password in the next box.
Service Name:
Enter the ISP service name (optional).
MTU: Maximum Transmission Unit - you may need to
change the MTU for optimal performance with your
specific ISP. 1492 is the default MTU.
IPv6 DNS Settings: Select either Obtain DNS server address
automatically or Use the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server
Address: addresses.
Enable DHCP-PD Check to enable DHCP-PD.
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the router's LAN Link-Local Address.
Enable Autoconfiguration: Check to enable the autoconfiguration feature.
Autoconfiguration Type:
Select Stateful (DHCPv6) or SLAAC+Stateless
DHCPv6 autoconfiguration.
Router Advertisement
Lifetime:
Enter the IPv6 address lifetime (in seconds).
D-Link DIR-640L User Manual
PPPoE
55