Step 6 Preparing The Remote Control - Panasonic SC-PT750 Operating Instructions Manual

step 6
Preparing the remote control
∫ Batteries
Insert so the poles (i and j) match those in the remote control.
R6/LR6, AA
Replace the cover.
≥ Do not use rechargeable type batteries.
7
step
Performing QUICK SETUP
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from the main unit, turn on your television and change its video input mode
(e.g. VIDEO 1, AV 1, etc.).
≥To change your television's video input mode, refer to its operating instructions.
≥This remote control can perform some basic television operations (➜ page 10).
DVD
SETUP
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
Press in and lift up.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫ Use
1
2
3
, , ,
ENTER
RETURN
4
5
6
To change these settings later
Select "QUICK SETUP" in the "Others" menu (➜ page 25).
Aim at the remote control signal sensor (➜ page 11), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front of
the unit.
Turn on the unit.
Select "DVD/CD".
DVD
Show the QUICK SETUP
screen.
SETUP
Follow the messages
Select
and make the settings.
RETURN
≥Menu Language
≥TV Type
≥TV Aspect
Register
Press to finish QUICK
ENTER
SETUP.
Press to exit.
SETUP
Setup
QUICK SETUP
Select the menu language.
English
to select and press ENTER RETURN to return
9