Panasonic SC-PT750 Operating Instructions Manual page 24

Changing the player settings
QUICK SETUP enables successive settings of the items in the shaded area.
∫ "Video" menu
TV Aspect
Choose the setting to suit your
television and preference.
TV Type
Select to suit the type of television.
Time Delay
When connected with a Plasma
display, adjust if you notice the audio is
out of sync with the video.
Still Mode
Specify the type of picture shown
when paused.
Black Level Control
Change the black level of the picture if
you connected a television through the
COMPONENT VIDEO OUT terminals.
§4
Refer to "Frame still and field still" (➜ page 32, Glossary).
∫ "Audio" menu
§
Dolby Digital
5
DTS Digital Surround
Dynamic Range Compression
Speaker Settings (➜ page 25)
Set the delay time for your center and
surround speakers.
§5
When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend
on the performance of this connected equipment.
∫ "HDMI" menu
RGB Range
Set "HDMI Color Space" to "RGB"
(➜ page 22, Picture Menu).
Video Mode
(This setting is irrelevant when
connected through the VIDEO OUT
terminal.)
Audio Output
EZ Sync
∫ "Display" menu
Menu Language
On-Screen Messages
24
≥ 4:3 Pan&Scan: Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
≥ 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
≥ 16:9: Widescreen television (16:9)
≥ Standard (Direct View TV)
≥ Projection TV
≥ 0ms
≥ Automatic
≥ Field §4
: The picture is not blurred, but picture quality is lower.
≥ Frame
§4
: Overall quality is high, but the picture may appear blurred.
≥ Lighter: When connected through VIDEO OUT.
≥ Darker: When connected through COMPONENT VIDEO OUT (Y/P
≥ Bitstream
≥ PCM
≥ Bitstream
§
5
≥ PCM
≥ Off
≥ On: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with
Dolby Digital)
≥ Center:
≥ Surround (L/R): 0.0/5.0/10.0/15.0 ms
≥ Standard
≥ Enhanced: When the black and white images are not distinct.
≥ On: When connected through the HDMI AV OUT terminal. Video is output from the HDMI terminal.
Video is also output from the COMPONENT VIDEO OUT terminal, but only in 480i (interlaced).
≥ Off: When connected through the COMPONENT VIDEO OUT terminal. Video is output from the
COMPONENT VIDEO OUT terminal according to the setting of the "Video Output Mode"
(➜ page 21, Picture Menu). Video is also output from the HDMI AV OUT terminal, but only in 480p
(progressive).
≥ On: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the
connected equipment, audio output may differ from the audio settings of the main unit.)
≥ Off: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of
the main unit.)
≥ On: The EZ Sync "HDAVI Control" function is available (➜ page 26).
≥ Off
≥ English
≥ On
≥ CRT Projector
≥ Plasma TV
≥ 20ms ≥ 40ms
Select to suit the type of equipment you connected to the HDMI AV OUT terminal.
Select "Bitstream" when the equipment can decode the bitstream (digital form of
5.1-channel data). Otherwise, select "PCM" (audio output is 2-channel).
(If the bitstream is output to the equipment without a decoder, high levels of noise
can be output and may damage your speakers and hearing.)
0.0/1.0/2.0/3.0/4.0/5.0 ms
≥ Français ≥ Español
≥ Off
≥ LCD TV/Projector
≥ 60ms ≥ 80ms
/P ).
B R
≥ 100ms