Step 3 Digital Transmitter Connection - Panasonic SC-PT750 Operating Instructions Manual

step 3
Digital transmitter connection
AV OUT
4
step
iPod connection
Proceed to step 5 if you are not connecting an iPod to the main unit.
For SC-PT753, use an optional SH-PD10 Panasonic Universal Dock for
iPod.
Dock adapter for
iPod nano 2nd generation
(aluminum)
(2GB, 4GB, 8GB)
11
[11] [10]
The mark , or
adapter.
≥ For other types of iPod, use the dock adapter sold separately.
Or visit the official Apple website for compatible adapters.
Do not connect or
disconnect the
dock while the
main unit is on.
Universal Dock
for iPod
step 5
AC cord connections
Wireless system
L R
I/D SET
AC power supply cord
(included)
To household
AC outlet
[For\areas\except\U.S.A.\
\and\Canada]
Conserving power
The main unit and the wireless system consume a small amount of
power when they are turned off (\U.S.A.\and\Canada] main unit: approx.
0.5 W, wireless system: approx. 0.2 W, \Others] main unit: approx. 0.9 W,
wireless system: approx. 0.3 W). To save power when they are not to be
used for a long time, unplug them from the household AC outlet.
8
You will need to reset some memory items after plugging in the main unit.
Digital transmitter
Insert fully until you hear a click.
AUX COMPONENT VIDEO OUT
OPTION V.1
P Y
L B
DIGITAL
LOOP
TRANSMITTER ANT GND
LOOP
P
R R VIDEO
OUT
Dock adapter for Dock adapter for
iPod 5th generation iPod 5th generation
(video) (60GB, 80GB) (video) (30GB)
10
[9]
is shown on the back of each dock
Connect the dock to the
back of the main unit.
When removing, use
your fingernail or a flat
object to lift upwards.
[For\areas\except\U.S.A.\and\Canada]
Before connecting the AC power supply cord
Set the voltage.
AC IN VOLT ADJ
110-127V 220-240V
[For\areas\except\U.S.A.\and\Canada]
≥ If the power plug does not fit your AC outlet
Use the power plug adaptor (included).
Ferrite core
If it still does not fit, contact an electrical parts
distributor for assistance.
Main unit
FM ANT
75
Do not insert or remove while
XM
the main unit is on.
AM
ANT
EXT
∫ Charging the iPod
The indicator lights up when
the iPod is inserted, and
charging starts.
9
Charging time
iPod nano 2nd generation (aluminum)
iPod 5th generation (video)
iPod nano 1st generation
iPod 4th generation (color display)
iPod 4th generation
iPod mini
OPTION V .1
[Note]
≥ AC cord must be connected with the main unit.
≥ "OPTION ¢" will be shown on the main unit's display during iPod
charging in main unit standby mode. It will go off when charging
is finished.
For the above models under "fixed 5-hour charging",
"OPTION ¢" continues to be displayed throughout this duration,
even when your iPod is fully charged. You can turn off this display
by removing the iPod from the dock.
≥Compatibility depends on the software version of your iPod.
Use a flat-head screwdriver to
move the voltage selector to the
appropriate position for the area
in which this system is used.
[Note]
The included AC power supply cords are for use with the main unit and
wireless system only. Do not use them with other equipment. Also, do
not use cords for other equipment with the main unit or wireless system.
iPod (not included)
≥ Connect the iPod firmly.
Until iPod is fully charged
5 hours (fixed)
AC IN
AC power supply cord
(included)
Main unit
To household
AC outlet