Panasonic SC-PT750 Operating Instructions Manual page 35

Dvd home theater sound system
Hide thumbs Also See for SC-PT750:
Table of Contents

Advertisement

HDMI or progressive video
There is ghosting when HDMI or
progressive output is on.
Pictures not in progressive
output.
Closed captions not displayed.
Radio
Distorted sound or noise is heard.
"ST" flickers or does not light.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
Wireless system
No sound.
The indicator on the wireless
system keeps flashing between
red and green.
Television displays
"/"
"Cannot display group xx, content xx"
"This disc may not be played in
your region"
No on-screen display.
Main unit's screen saver remains
XM Satellite Radio advisory messages
"ANTENNA" is flashing.
"UPDATING" is flashing.
"NO SIGNL" is flashing.
"LOADING" is flashing.
"OFF AIR" is flashing.
"XM ---"
"----"
You can receive only promotional
XM channels.
≥ This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlaced output.
– When using the COMPONENT VIDEO OUT terminal, set "Video Output Mode" in Picture Menu to
"480i". (Alternatively, press and hold [CANCEL] to switch to "480i".)
– When using the HDMI AV OUT terminal, set "Video Output Mode" in Picture Menu to "480i" output
marked with an "¢". Or, disable the HDMI AV OUT connection and use other video connections.
Make the settings in the following order:
1 Set "Video Mode" in the "HDMI" menu to "Off".
2 Set "Video Output Mode" in Picture Menu to "480i". (Alternatively, press and hold [CANCEL] to
switch to "480i".)
≥ Select "480p" in "Video Output Mode" in Picture Menu.
≥ The unit's VIDEO OUT terminal outputs the interlaced signal even if "PRG" is displayed.
≥ When HDMI or progressive output is on, closed captions will not be displayed.
≥ Adjust the position of the FM or AM antenna.
≥ Use an outdoor antenna.
≥ Turn the television off or move it away from the unit.
≥ Separate the antenna from other cables.
≥ Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥ Ensure that the wireless system is plugged into the AC outlet and is turned on. Ensure " [W1] " is
displayed on the main unit's display.
≥ There is a power supply problem. Consult the dealer.
≥ The operation is prohibited by the unit or disc.
≥ You are trying to display incompatible contents.
≥ Only DVD-Video discs that include or have the same region number as the one on the rear panel of this
unit can be played.
≥ Select "On" in "On-Screen Messages" in the "Display" menu.
≥ When using the HDMI connection, audio/video information is continually transferred between the
main unit and the television regardless of which source has been selected on the main unit. This is
normal.
The XM Satellite Radio is available only in the 48 contiguous United States and Canada.
≥ The XM antenna is not properly connected. Check the connection and make sure the antenna
cable is not damaged.
≥ The XM antenna is being updated with the latest encryption code.
Wait a few seconds for the update to complete.
≥ You may have selected an XM channel that has been blocked, or is no longer available with your
subscription package.
For inquiry, call XM's Listener Care at 1-800-XMRADIO (U.S. residents) or
1-877-GET-XMSR (Canada residents).
≥ The XM signal is too weak. Reorient the XM antenna for better reception.
≥ The XM antenna is receiving and decoding the broadcast information. Wait a few seconds for
loading to complete.
≥ The selected XM channel is not currently broadcasting. Select a different channel.
≥ The selected XM channel is not available. Select a different channel.
≥ Supplemental text information, such as the song title or artist's name is not available for that
particular broadcast.
You can change the type of XM channel information that is displayed by pressing [FL DISPLAY].
≥ Your XM Satellite service has not been activated, or your subscription has expired.
To activate your XM Satellite service, or to renew your subscription:
– For U.S. residents, visit XM on the Web at www.xmradio.com or call XM's Listener Care at
1-800-XMRADIO (1-800-967-2346).
– For Canada residents, visit XM on the Web at www.xmradio.ca or call XM's Listener Care at
1-877-GET-XMSR (1-877-438-9677).
You should have your Radio ID ready.
21
21,
24
21
6
7
8
8
Cover
page
24
7
28
29
29
29
28
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-pt753

Table of Contents