Do you have a question about the SC-PT750 and is the answer not in the manual?
Questions and answers
Curtis Ziegler
March 18, 2025
How do you hook up the box for the wireless speakers the box model#se-fx65
1 comments:
Mr. Anderson
March 18, 2025
To connect the Panasonic SC-PT750 to the wireless speakers with model SE-FX65, follow these steps:
1. Position the Wireless System: Place the Panasonic wireless system SH-FX65 near the main unit but away from other wireless equipment, such as microwave ovens and radio devices, to prevent interference.
2. Connect the Speaker Cables: Attach the corresponding speaker cables to the speaker terminals on the SH-FX65 wireless system, ensuring correct polarity and matching the cable stickers for easier identification.
3. Insert the Wires Correctly: Make sure the speaker wires are fully inserted into the terminals without crossing or short-circuiting.
4. Power On the System: Plug in the SH-FX65 wireless system and turn on both the SC-PT750 main unit and the wireless system.
5. Check the Connection: Ensure the wireless system is properly linked and that sound is coming from the surround speakers.
By following these steps, the SC-PT750 will be connected to the SE-FX65 wireless speakers correctly.
This answer is automatically generated
Curtis Ziegler
March 18, 2025
How to hookup the rear wireless speakers on model#sa-pt753
1 comments:
Mr. Anderson
March 18, 2025
To connect the rear wireless speakers to the Panasonic SC-PT750:
1. Use the Wireless System: The system includes a wireless transmitter (SH-FX65T) and a wireless receiver (SE-FX65). 2. Connect the Wireless Transmitter: Insert the transmitter into the main unit. 3. Position the Wireless Receiver: Place the receiver near the rear speakers, keeping it within approximately 2 meters (6-1/2 feet) of other electronic devices to avoid interference. 4. Connect the Speaker Cables: Attach the corresponding speaker cables from the wireless receiver to the surround speakers, ensuring the polarity is correct. 5. Power On the Wireless System: Plug in the wireless receiver and turn on the system.
Ensure the speakers are not placed too close to other electronic devices to minimize interference.
This answer is automatically generated
Lucas Asher Cain
March 10, 2025
Hello I hope you are doing well, Ive had this sound system as a gift for years and ive always been curious if we can control the eq and or bass output without the remote control. - Thank you
1 comments:
Mr. Anderson
March 10, 2025
Yes, the Panasonic SC-PT750 sound system's operations are mainly described using the remote control, but it is mentioned that some operations can also be performed on the main unit if the controls are the same. Therefore, EQ and bass output adjustments may be possible without the remote control, depending on the available controls on the main unit.
Need help?
Do you have a question about the SC-PT750 and is the answer not in the manual?
Questions and answers
How do you hook up the box for the wireless speakers the box model#se-fx65
To connect the Panasonic SC-PT750 to the wireless speakers with model SE-FX65, follow these steps:
1. Position the Wireless System: Place the Panasonic wireless system SH-FX65 near the main unit but away from other wireless equipment, such as microwave ovens and radio devices, to prevent interference.
2. Connect the Speaker Cables: Attach the corresponding speaker cables to the speaker terminals on the SH-FX65 wireless system, ensuring correct polarity and matching the cable stickers for easier identification.
3. Insert the Wires Correctly: Make sure the speaker wires are fully inserted into the terminals without crossing or short-circuiting.
4. Power On the System: Plug in the SH-FX65 wireless system and turn on both the SC-PT750 main unit and the wireless system.
5. Check the Connection: Ensure the wireless system is properly linked and that sound is coming from the surround speakers.
By following these steps, the SC-PT750 will be connected to the SE-FX65 wireless speakers correctly.
This answer is automatically generated
How to hookup the rear wireless speakers on model#sa-pt753
To connect the rear wireless speakers to the Panasonic SC-PT750:
1. Use the Wireless System: The system includes a wireless transmitter (SH-FX65T) and a wireless receiver (SE-FX65).
2. Connect the Wireless Transmitter: Insert the transmitter into the main unit.
3. Position the Wireless Receiver: Place the receiver near the rear speakers, keeping it within approximately 2 meters (6-1/2 feet) of other electronic devices to avoid interference.
4. Connect the Speaker Cables: Attach the corresponding speaker cables from the wireless receiver to the surround speakers, ensuring the polarity is correct.
5. Power On the Wireless System: Plug in the wireless receiver and turn on the system.
Ensure the speakers are not placed too close to other electronic devices to minimize interference.
This answer is automatically generated
Hello I hope you are doing well, Ive had this sound system as a gift for years and ive always been curious if we can control the eq and or bass output without the remote control. - Thank you
Yes, the Panasonic SC-PT750 sound system's operations are mainly described using the remote control, but it is mentioned that some operations can also be performed on the main unit if the controls are the same. Therefore, EQ and bass output adjustments may be possible without the remote control, depending on the available controls on the main unit.
This answer is automatically generated