Insufficient Memory; Memory Full - Lexmark W812 User Reference Manual

37 Insufficient
Memory
What this message means:
The printer memory is full and cannot continue processing current print jobs.
What you can do:
•
Press to clear the message and continue the current print job. The printer frees memory by
Go
deleting the oldest held job and continues deleting held jobs until there is enough printer
memory to process the job.
•
Press to clear the message without deleting any held jobs. The current job may not print
Stop
correctly.
•
Press to open the Job Menu and cancel the current job.
Menu
•
To avoid this error in the future:
–
Delete fonts, macros, and other data in printer memory.
–
Install additional printer memory.
Note: The messages 37 Insufficient Memory and Held Jobs may be lost
alternate on the display.
See also:
Holding a job in the

38 Memory Full

What this message means:
The printer is processing data, but the memory used to store pages is full.
What you can do:
•
Press to clear the message and continue printing the job. The job may not print correctly.
Go
•
Press to open the Job Menu and cancel the current job.
Menu
•
To avoid this error in the future:
–
Simplify the print job by reducing the amount of text of graphics on a page and deleting
unnecessary downloaded fonts or macros.
–
Install additional printer memory.
See also:
Canceling a print job
printer; Held Jobs may be
117
lost; Held Jobs may not be restored