Lexmark Printer User Manual page 124

Table 3-3: Common Variables for Both Printer Languages (Continued)
Variable
PARALLEL
(DEFAULT only)
(Port Specific)
PASSWORD
(DEFAULT only)
PERSONALITY
(Port specific)
POWERSAVE
(DEFAULT only)
Function Selections
Parallel Protocol SLOW, FAST
A value of SLOW indicates the Parallel Protocol
setting is Standard. The value of FAST indicates the
Parallel Protocol setting is FASTBYTES.
INQUIRE or DINQUIRE returns the value of the
Parallel Protocol as follows:
• If Parallel Protocol is set as Standard, SLOW is
returned.
• If Parallel Protocol is set as Fastbytes, FAST is
returned.
Default password 0 to 65535
for PJL NVRAM
Locks the printer operator panel to keep the user
security
defaults from changing. Refer to your printer user
documentation for more information.
The Default PJL password is 0.
If the PJL password is not equal to 0, a DINQUIRE or
INQUIRE on the PASSWORD variable returns
ENABLED. If the PJL password is equal to 0, a
DINQUIRE or INQUIRE on the PASSWORD variable
returns DISABLED. See the PASSWORD parameter
of the JOB command on page 3-5 for more
information.
SmartSwitch PCL, POSTSCRIPT, AUTO
settings
PERSONALITY controls the SmartSwitch settings for
the interface link on which the PJL command is
received.
If AUTO is sent, both
Smartswitch
If PCL is sent,
SmartSwitch
If POSTSCRIPT is sent,
OFF and
When queried, AUTO is returned if both SmartSwitch
settings are ON. If one SmartSwitch setting is OFF,
the printer language whose SmartSwitch setting is ON
is returned. If both SmartSwitch settings are OFF, the
default printer language is returned.
Power Save ON, OFF
feature
ON enables the power-saving feature.
OFF disables the power-saving feature.
Note: Some printer models released in the year 2000
or later designated as Energy Star printers cannot
have Power Saver disabled.
3-17
and
PS SmartSwitch
menu settings are set to ON.
is set to OFF and
PS SmartSwitch
is set to ON.
PCL SmartSwitch
PS SmartSwitch is set to ON.
PJL
Factory Default
FAST
0
AUTO
PCL
PCL
is set to
ON