Supplemental Operators; Command Format - Lexmark Printer User Manual

Backward compatibility:
With the appropriate printer driver installed and selected, your software program
enumerates and selects the available PostScript fonts.

Supplemental Operators

This section explains PostScript emulation supplemental operators in detail. These
supplemental operators are extensions to the standard PostScript language. For each
supplemental operator, the exact syntax is listed, as well as the values returned on the
stack and possible error messages.
Tips for PostScript emulation command extensions:
To determine which operators your printer supports, see Table C-1 on page C-1.

Command Format

The PostScript emulation supplemental operators are described in this chapter in the
following format:
•
Set operators are effective until the end of a job. At the end of a job, these
values return to their default values.
•
Setdefault operators do not become effective until the end of a job. However,
the value may be queried immediately.
•
Unless otherwise noted, all of these operators are located in the statusdict
dictionary.
•
In userdict, #copies is initialized at the beginning of each job to the number
of copies selected either by PJL or from the printer operator panel.
4-14
PostScript
(temporary, changes the PostScript job only)
(permanent, changes the default in NVRAM)