Using The Printer Control Panel - Lexmark Impact S300 Series Quick Reference Manual

7
6
5
Use the To
1 Scanner glass Scan and copy photos and documents.
2 Power supply with port Connect the printer to a working electrical outlet that is near and easily
accessible.
3 Duplex unit
• Print on both sides of a sheet of paper.
• Remove paper jams.
Note: The duplex unit is available only on select models.
4 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
5 Printhead access Install the printhead.
Note: The carrier moves to the printhead access area when no printhead
is installed in the printer.
6 Ink cartridge access Install, replace, or remove ink cartridges.
7 Scanner unit
• Access the ink cartridges and printhead.
•
Remove paper jams.
1
2
3
4
6

Using the printer control panel

1 2
ON
13 12 11
Use the
1 Power button
2 Copy button
3 Scan button
4 Photo button
5 Color/Black
6 Start button
3 4 5 6 7
Color
START
Black
2-Sided
Eco-Mode
Cancel
10 9 8
To
•
Turn the printer on and off.
• Switch to Power Saver mode.
Note: When the printer is on, press
switch to Power Saver mode. Press and hold
for three seconds to turn off the printer.
Access the copy menu and make copies.
Access the scan menu and scan documents.
Access the photo menu and print photos.
Switch to color mode or black-and-white mode.
Start a print, scan, or copy job, depending on
which mode is selected.
to