Table of Contents
Advertisement
4040 Finisher
1. General Information
Maintenance Approach
The diagnostic information in this manual leads you to the correct
field replaceable unit (FRU) or part. Use the error code charts,
symptom index, and service checks to determine the symptom and
repair the failure.
After you complete the repair, perform tests as needed to verify the
repair.
Stapler Test
The stapler test must be run after a new staple cartridge has been
installed.
1. Be sure Side is selected from the output bin menu so jobs are
directed to the finisher, and Staple is set to Staple 1 or Staple 2.
2. Use the tip of a ballpoint pen or similar object to press the test
button.
General Information 1-1
Advertisement
Table of Contents
