Bottom Guide Removal - Lexmark Optra N 4040-FIN Service Manual

4040 Finisher

Bottom Guide Removal

1. Remove the tray.
2. Remove the 3 screws (1).
3. Remove the 3 screws (2) and pull the bottom guide (3).
4. Remove the cable (2) from the cable guide (1).
5. Disconnect the 2 connectors (3) and remove the bottom guide
(4).
When you replace the bottom guide be sure it is completely seated
in the frame. This will prevent binds that could cause the shutter to
give error codes.
Repair Information 3-8