Installation; Location - Kenwood KDW45S13 Installation Instructions Manual

Installation

installation

location

When selecting a position for your slimline
dishwasher you should make sure the
installation surface is flat and firm, and the
room is well ventilated. Avoid locating your
dishwasher near a heat source, eg. cooker,
boiler or radiator. Extreme cold ambient
temperatures may also cause the appliance
not to perform properly. This dishwasher is
not designed for use in a garage or outdoor
installation.
Do not drape the dishwasher with any
covering. When installing, ensure that free
space is left at the sides.
All parts removed must be saved to do
the reinstallation in the future. Ensure
the dishwasher is unplugged and empty.
We recommend that 2 people handle the
dishwasher during installation.
1. Please ensure the dishwasher is installed
by a qualified technician. Refer to the tools
required.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required. Good levelling is
essential for correct closure and sealing
of the door. When the unit is correctly
levelled, the door should not catch the
inner liner on either side of the cabinet.
The adjustable feet may be loosened or
tightened in order to obtain the optimum
levelling of the unit.
Delay 1/2 Load
Start
Powe r
620 620
850 850
30 30 Rapid
Eco Rinse Glass
3in1 Intensive Normal
Delay Start 1/2 Load
Power
450 450
450 450
unit in mm
Glass Rapid
Eco Rinse
e Normal
3in1 Intensiv
580 580
Rinse Glass Rapid
Normal Eco
3in1 Intensive
Delay 1/2 Load
Start
Power
850 850
level
level
level
level
9