Hints And Tips; Fault Code; Technical Problems - Kenwood KDW45S13 Installation Instructions Manual

hints and tips

• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.

fault code

Codes
Water tap is not turned on.
Low water pressure (<0.04MPa)
E1
Flow meter is broken.
The wire terminals which connect the
flow meter are loose.
The tank is leaking.
The hose is leaking.
E4
The float switch is broken or PCB is
faulty.

technical problems

Problem
The dishwasher does not start.
The drain pump is not working
properly.
Possible Causes
Technical Problems
Possible Causes
The door is not properly
closed.
The unit is not connected to
the mains.
The unit is not switched on.
Fault code E4 - The anti-
flooding system has operated.
Remedy
Turn on the water tap.
Turn on the water tap and ensure it is in full
position.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
Remedy
Close the door firmly.
Connect the plug to the mains.
Press the "on" button and select a
programme.
• Disconnect from the mains.
• Disconnect the water inlet.
• Call a qualified technician.
31