Introduction; Symbol Used In This Manual; About The Symbol Display; Notes On Discs - Toshiba SD-34VLSL Owner's Manual

Introduction

To ensure proper use of this product, please read this
owner's manual carefully and retain for future refer-
ence.
This manual provides information on the operation
and maintenance of your DVD+VCR. Should the unit
require service, contact an authorized service loca-
tion.

Symbol Used in this Manual

The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of electric shock.
The exclamation point alerts you to the pres-
ence of important operating and maintenance
/ servicing instructions.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Note:
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following sym-
bols is applicable only to the disc represented by the
symbol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
DivX Discs
About the Symbol Display
" " may appear on your TV display during opera-
tion and indicates that the function is not permitted by
this unit or the disc.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sun-
light.

Cleaning Discs

Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.

Moisture Condensation

Never operate the DVD+VCR immediately after mov-
ing it from a cold location to a warm location. Leave it
for two or three hours without operating it. If you use
the DVD+VCR in such a situation, it may damage
discs/tapes and internal parts.
1-10