Time Search; Changing Video Mode; Zoom; Marker Search - Toshiba SD-34VLSL Owner's Manual

DVD-V VCD

Time Search

To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
2. Press v / V to select the time clock icon and
"-:--:--" appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct num-
bers.
4. Press ENTER/OK to confirm. Playback starts from
the selected time.

Changing Video Mode

With certain discs, the playback picture may be
•
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case,
the picture quality may be improved by changing
the video mode.
To change the video mode, press and hold
•
DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
Video mode sequence:
•
MODE1 → MODE2 → MODE3 → MODE1
If you turn off the power, the video mode will return
•
to initial default state (MODE1).
Detailed Description of each Video Mode
MODE1 : The source material of the DVD video (film mate-
rial or video material) is determined from disc
information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan
method.
MODE3 : Suitable for playing video based content with
comparatively little motion.
Note:
The video mode setting only works when the
Progressive Scan option is set to "On" in the Setup
menu.
DivX
DVD-V DVD-A
DVD-V DVD-A

Zoom

Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→ 1600% size → screen fit mode → 100% size
Screen fit mode:
You can change the way the image appears on
the screen when you're playing a DVD movie.
Press v/V to select between Normal, Enhanced,
and Maximum.
v V buttons to move through the
3. Use the F G
zoomed picture.
4. To resume normal playback, press ZOOM repeat-
edly or CLEAR button.
Notes:
• Zoom may not work on some DVDs.
• Screen fit mode is available for playing the DVD disc, VR
disc and movie file.
DVD-V

Marker Search

To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press
number that you want to recall or clear.
3. Press ENTER/OK and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.

Screen Saver

The screen saver appears when you leave the
DVD+VCR in Stop mode for about five minutes.
1-37
VCD DivX
DVD-A VCD DivX
F G
/ to select a marker