Initial Settings; General Operation; Language; Menu Language - Toshiba SD-34VLSL Owner's Manual

Initial Settings

By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 21 to 24.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press w on the remote control.
To go back to the previous level:
Press W on the remote control.

General Operation

1. Press SETUP.
The Setup menu appears.
2. Use v / V to select the desired option then press
w to move to the second level. The screen shows
the current setting for the selected item, as well
as alternate setting(s).
3. Use v / V to select the second desired option
then press w to move to the third level.
4. Use v / V to select the desired setting then press
ENTER/OK to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.

LANGUAGE

LANGUAGE

Menu Language

Disc Audio
Disc Subtitle
Disc Menu
Menu Language
Select a language for the Setup menu and on-screen

display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number but-
tons then ENTER/OK to enter the corresponding 4-digit
number according to the language code list in the refer-
ence chapter (see p. 44). If you enter the wrong lan-
guage code, press CLEAR.
DISPLAY

TV Aspect

4:3 : Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is

Display Mode

Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.

Progressive Scan

Progressive Scan Video provides the highest quality
pictures with less flickering.
English
If you are using the Component Video jacks for con-
Original
nection to a TV or monitor that is compatible with a
Off
Original progressive scan signal, set Progressive Scan to On.
Move Select
DVD-V DVD-A
1-26
DISPLAY
TV Aspect 4 : 3
Display Mode Panscan
Progressive Scan Off
TV Output Select RGB
Move
DVD-V DVD-A
connected.
DVD-V DVD-A
Select