Lock (Parental Control); Rating; Password (Security Code); Country Code - Toshiba SD-34VLSL Owner's Manual

LOCK (Parental Control)

LOCK

Rating

Password

Country Code

DVD-V
Rating
Some movies contain scenes that may not be suit-
able for children to view. Many of these discs contain
parental control information that applies to the com-
plete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. DVD video discs may or may not respond to
the parental control setting if the Country code of the
disc is set wrongly. Some discs offer more suitable
scenes as an alternative.
The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
1. Select "Rating" on the LOCK menu then
press w.
2. To access the Rating, Password and Country
Code features, you must input the 4-digit security
code you created. If you have not yet entered a
security code you are prompted to do so.
Input a 4-digit code and press ENTER/OK. Enter it
again and press ENTER/OK to verify. If you make
a mistake before pressing ENTER/OK, press
CLEAR.
3. Select a rating from 1 to 8 using the v / V but-
tons.
Rating 1-8: Rating one (1) has the most restric-
tions and rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Note:
If you set a rating for the player, all disc scenes with the
same rating or lower are played. Higher rated scenes
are not played unless an alternate scene is available on
the disc. The alternative must have the same rating or a
lower one. If no suitable alternative is found, playback
stops. You must enter the 4-digit password or change the
rating level in order to play the disc.
Unlock
New
DE
Move Select
1-29
4. Press ENTER/OK to confirm your rating selection,
then press SETUP to exit the menu.
5. Press OPEN/CLOSE (U) to activate parental
control.

Password (Security Code)

You can enter or change password.
1. Select "Password" on the LOCK menu then press
w.
2. Press ENTER/OK.
3. Follow step 2 as shown left (Rating). "Change" or
"New" is highlighted.
4. Enter the new 4-digit code, then press ENTER/OK.
Input it again to verify.
5. Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number "210499" and the security
code is cleared.
3. Enter a new code as described above.
DVD-V
Country Code
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the
list in the reference chapter (see p. 44).
1. Select "Country Code" on the LOCK menu then
press w.
2. Follow step 2 as shown left (Rating).
3. Select the first character using v /V buttons.
4. Press ENTER/OK and select the second charac-
ter using v /V buttons.
5. Press ENTER/OK to confirm your country code
selection.