One-Touch Timer Recording (Otr) - Toshiba SD-34VLSL Owner's Manual

Dvd player & video cassette recorder
Table of Contents

Advertisement

One-touch Timer Recording (OTR)

Your DVD+VCR allows you to make recordings
using a variety of simple methods:
One-touch Timer Recording (OTR) start
recording immediately for a set period of time or
until the video cassette runs out.
Your DVD+VCR incorporates Long Play (LP)
which enables you to record up to twice the
amount of time on a video cassette. For example
an E-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to
record up to 360 minutes. Please note there will be
a slight loss in picture and sound quality when
using LP.
1. Make sure that you have correctly connected your
DVD+VCR as described earlier in this book.
Press I/ 1 to turn on your DVD+VCR.
2. Insert a video cassette with protection tab into
your DVD+VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
3. Press PR/TRK + or - to select the programme
number you wish to record.
You may also directly select programme number
using the numbered buttons on the remote con-
trol.
4. If you wish to record directly from the SCART
sockets or AV jacks, press INPUT SELECT
repeatedly until the input you wish to record from
is displayed.
AV 1 for recording from EURO AV1 SCART socket
on the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket
on the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) jacks on the front of your unit.
5. Press SP/LP if you wish to record in Long Play or
Standard Play.
SP will produce improved picture and sound quali-
ty, however LP will provide twice as much record-
ing time as SP.
6. Press REC/OTR on the remote to start recording.
RECORD will appear on the TV screen.
Press REC on your unit or press REC/OTR on the
remote several times. Each successive press will
increase the record time by 30 minutes until you
reach a maximum of 9 hours.
7. Press PAUSE/STILL II/R to avoid recording
unwanted scenes.
Press PAUSE/STILL II/R to continue recording.
Tapes can be paused for up to 5 minutes; RECP
will be displayed briefly when a tape is paused.
After 5 minutes your DVD+VCR will stop recording
to prevent damaging the tape or your DVD+VCR.
8. Press STOP ■ to end recording.
Press EJECT U.
EJECT will appear on the TV screen for a few
seconds.
Notes:
If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the pro-
tection tab on the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to select TV mode and then select-
ing a different channel on your TV.
1-31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents