Paper Feed Service Check - Lexmark OPTRA 4069-XXX User Manual

4069-XXX

Paper Feed Service Check

If you have a 936 Transport Motor Error go to the
Check" on page 2-68
FRU
1 Alignment Assembly
2 Inner Deflector
Autocompensator fails to feed paper. Failures occur randomly
throughout the stack of paper.
FRU
1 Pass Through Sensor
2 Autocompensator
Assembly
3 Wear Strips in Tray X
problem is found.
2-88
Service Manual
.
Action
Check to ensure the alignment
assembly is correctly attached to the
left side frame and the mounting
screws are tight. Check the
alignment assembly for any signs of
worn rollers, contaminated rollers or
binds. Replace the alignment
assembly if any problem is found.
Check the inner paper deflector for
correct installation. If the deflector is
bowed or not fitting correctly, replace
the deflector.
Action
Check the pass through sensor for
correct installation and operation.
The autocompensator pick roll shaft
assembly is not providing enough
torque if the pick rollers are not
picking the paper correctly. Replace
the autocompensator assembly.
Check the wear strips for excessive
wear, scratches or rough spots.
Replace the wear strips if a problem
is found.
"Main Drive Service